Audiotechnik Dietz 66103 사용 설명서 - 페이지 8
{카테고리_이름} Audiotechnik Dietz 66103에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiotechnik Dietz 66103 8 페이지. Cable kit alfa / fiat
페이지 인쇄
8
Installation
Open wires
from the harness:
Technical data
Power supply:
Temperature range: - 40 - +85 °C
Weight:
Dimensions:
Conncect the brown and black ISO Connector with your radio.
Attention: Sometimes are the red and yellow wires mixed. You can change them
with the integrated bullets in the wires.
Diagramm black Iso connector: (view from wiring side)
1 not used
3. not used
2 not used
4: memory (yellow)
On demand please connect the followin
yellow/white
Handbrake
grey
Speedsignal
blue:
Signal for rear gear
For 66030, 66031_BP, 66032_BP:
The 4-pol plug from the harness is the connection for steering wheel control to the
radio. There are different cables available depending from the radio brand.
Connect the optional cable between this plug and the connection on the radio.
(Mostly 3.5 mm plug or single wire called „SWC" or „Remote Control")
For 66020, 66030, 66031_BP, 66032_BP:
Conncet the 14 pol-plug from the harness with the interface. In case of interface
66020 you have to open the interface box to find the connector.
Connect the double ISO connector with the opposite connector in the car.
12 V DC
0,127 kg
Cable length approx. 300 mm
Audiotechnik Dietz
®
Copyright © by Audiotechnik Dietz
5: remote (blue)
6: Illumination (orange)
®
Vertriebs-GmbH
Maybachstr. 10
D-67269 Grünstadt
Germany
www.dietz.biz
Vertriebs-GmbH ● Germany
®
Rev 1, Stand: 02/2018
7. ignition (red)
8: ground (black)