Audiotechnik Dietz 66120 사용 설명서 - 페이지 7

{카테고리_이름} Audiotechnik Dietz 66120에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiotechnik Dietz 66120 8 페이지. Cable kit bmw k-bus

Otherwise the interface and all connected components can be destroyed! Steering wheel remote control will

only be adapted when it was originally built in and communicates via CAN data bus with the OEM radio. If the

car is delivered without radio or without preparation for radio, the CAN data bus may first be programmed via

diagnosis with radio functions from an authorized dealer. Otherwise the CAN interface may not work properly.

The CAN Bus device is an interface which reads out afterwards described data from the CAN-protocol of a car,

needed e.g. by the navigation systems. Its' installation in a car means an important interference into a complex

system which we as a supplier of the above mentioned unit do not know very well. We cannot guarantee that

picking off data from the CAN Bus system may not influence other electronic units or systems in the car. So if

you install electronic units in cars, please always pay attention to the installation-guides and the warranty-

regulations of the car producer because otherwise the warranty will be lost. Because the changes in mass-

production of the cars, we also cannot guarantee, that the interface is suitable in all the above mentioned

combinations. To avoid risks, we advise you to contact the car producer or one of his dealers.

The cable kit is compatible with the following types of cars:

BMW:

X3 (2003-2005),

X5 (1999-2006)

MINI:

Mini (2001-2006)

Functional description

The following signals can be read out of the CAN data bus with this cable kit, if supported by the car:

Steering wheel remote control (if exists) for units from different manufacturers (if exists)

Attention: Inside of interface box 66030 must be one jumper changed (see manual 66030)!

Vertriebs-GmbH ● Germany

Rev 1, Stand: 02/2018