Audiotrak AUDIOTRAK Prodigy HD2 사용자 설명서 - 페이지 11

{카테고리_이름} Audiotrak AUDIOTRAK Prodigy HD2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiotrak AUDIOTRAK Prodigy HD2 19 페이지. High-end 192 khz reference hifi audio interface

페이지 인쇄

1. Hardware Installation

AUDIOTRAK

Prodigy HD2

The Prodigy HD2 control panel features a menu area for configuration:

1. Main / QSound panel

You can control input and output on the MAIN / QSound panel. It is also the default screen you see

when you first launch the panel. Basic functions of Prodigy HD2 are controlled from this screen.

1) The QXpander™ functions provides virtual mono-to-3D and stereo-to-3D stereo sound stage

synthesis and enhancement.

2) QSizzle™ and QRumble™ provide dynamic spectral emphasis. This is especially valuable for

restoring compressed audio (MP3, internet broadcast etc.). The faders are provided for fine tuning.

3) Normalize provides an automatic volume level normalization algorithm that can be enabled and

disabled here.

4) Output: You can change the output level on all channels by clicking and dragging the fader bar.

The number on the bottom shows the relative amount in dB. Clicking this number enables you to

mute the channel.

5) WAV·MAS: You can adjust all input / output monitoring levels by clicking and dragging the

fader in the master control panel. The number on the bottom shows you the relative monitoring

level in %. Clicking this number enables you to mute all channels. Note: MAS (Master) refers to the

actual audio output level. WAV (Wave) refers to the playback of (digital PCM) audio data only.

6) ANA DIG: Shows the analog input and digital output levels.

7) S/PDIF: Allows you to switch between "Consumer" and "Professional" as S/PDIF output status

bit.

8) M-CLOCK: Shows the current master clock of the digital output signal frequency.