Audiotrak AUDIOTRAK Prodigy HD2 사용자 설명서 - 페이지 7

{카테고리_이름} Audiotrak AUDIOTRAK Prodigy HD2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiotrak AUDIOTRAK Prodigy HD2 19 페이지. High-end 192 khz reference hifi audio interface

페이지 인쇄

1. Hardware Installation

AUDIOTRAK

Prodigy HD2

Figure 4. Removing the PCI Slot faceplate

If the PCI slot is covered by a faceplate, you can remove it by removing the screw holding it in

place or by prying it off with a screwdriver.

Insert the Prodigy HD2 card into the PCI slot, firmly pushing the card into the slot until it is seated

securely. Replace the screw, and tighten it.

Figure 5. Prodigy HD2 installed in a PCI slot

4. Close the computer case.

5. Software Installation

After completing the hardware installation, you need to install the Windows driver. The installation

steps in the different versions of Windows vary, but they are typically very similar.

Note: Depending on your system, you may need the Windows installation CD.