Abus Nexello PLMK10100 운영 매뉴얼 - 페이지 7

{카테고리_이름} Abus Nexello PLMK10100에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Abus Nexello PLMK10100 19 페이지. Bypass opening detector

1.3. Operating principle

The device was developed for use in alarm and home automation systems that use the Z-Wave wireless

standard. The device has the following functions:



Magnetic field sensor

It uses magnetic field sensor technology to detect whether doors or windows are open or closed

in a defined area.



Bypass button

for temporary deactivation of the sensor without having to deactivate the entire alarm system.

Prevents the sending of an open/close cycle or the sending of the "open" status for 5 minutes.

E.g. for short bursts of ventilation or smoking on the window during internal activation. Function

can be deactivated via parameter setting.

Different keystrokes can also be used for scene control.



Tamper protection between the device and wall bracket

When the housing is opened, the sabotage switch is triggered and the device sends a sabotage

alarm to the Z-Wave controller.

The device..:



... is a battery operated opening detector



... is suitable for mounting on door/window frames due to its design



... is Z-Wave Plus compatible & certified



... supports the Z-Wave S2 standard (Security 2)



... has a low battery warning function



... was developed for indoor installation

This product can be operated in any Z-Wave network with other Z-Wave certified devices from other

manufacturers. All mains-powered nodes within the network act as repeaters, regardless of

manufacturer, to increase the reliability of the network.

The DSK code (Device-Specific-Key) is the device-specific key of your device and is required for secure

teach-in (inclusion) via S2 at the gateway. The first 5 digits of the DSK code can be found on the QR

Code on the side of the product. Please enter them in the inclusion process when prompted.

Alternatively, you can transfer the entire DSK code that you find on the enclosed DSK card to the

gateway via QR Code Scan. Please keep the DSK card in a safe place!

Hint:

We recommend secure S2 inclusion (must be supported by the gateway) Please enter the 5 digits of

the DSK code (device side) or the entire DSK code (QR code) when prompted.

English