Abus Nexello PLMK10100 운영 매뉴얼 - 페이지 8

{카테고리_이름} Abus Nexello PLMK10100에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Abus Nexello PLMK10100 19 페이지. Bypass opening detector

2. Functional overview

This product supports SmartStart:

SmartStart-enabled products can be added to a Z-Wave network by scanning the Z-Wave QR code

present on the product with a controller that provides SmartStart integration. No further action is

required, and the SmartStart product will be automatically added within 10 minutes of powering up near

the network.

Slide the opening detector holder down.

your

Z-wave

controller

SmartStart, follow these instructions for Product

Classic Inclusion:

Activate the inclusion mode (teach-in mode) on the

gateway. (for more details, refer to the operating

instructions of the gateway)

Or, in your Z-Wave app, press the "+" button (Add /

Inclusion) and follow the instructions to set the

gateway to inclusion mode.

Keep the device within range of the gateway.

Remove

the

safety

compartment. We recommend using only the original

Duracell battery supplied.

Then press the Link button 3 times quickly (within 1.5

seconds) using the pin to start the inclusion on the

device.

The LED starts flashing green for up to 60 seconds

English

does

not

support

strip

from

the

battery