Abus PLSG10000 사용자 설명서 - 페이지 15

{카테고리_이름} Abus PLSG10000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Abus PLSG10000 16 페이지. Z-wave indoor siren
Abus PLSG10000에 대해서도 마찬가지입니다: 빠른 매뉴얼 (4 페이지)

페이지 인쇄

Switch Binary Report

Shows the status of the piezo siren alarm.

0x00

0xFF

Siren On/Off

Switches the status of the piezo alarm of the siren

0xFF

0x00

3.2.

Overview configuration parameters

Z-Wave products can be used directly after inclusion in the network. Configuration settings, however,

can be used to adapt the device's behavior even better to the requirements of the application and to

activate additional functions.

para-

byte

meter

size

3.3. Overview of Supported Command Classes

1. COMMAND_CLASS_ZWAVEPLUS_INFO_V2

2. COMMAND_CLASS_ASSOCIATION_V2

3. COMMAND_CLASS_ASSOCIATION_GRP_INFO

4. COMMAND_CLASS_TRANSPORT_SERVICE_V2

5. COMMAND_CLASS_VERSION_V3

6. COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

7. COMMAND_CLASS_DEVICE_RESET_LOCALLY

8. COMMAND_CLASS_POWERLEVEL

9. COMMAND_CLASS_SECURITY

10. COMMAND_CLASS_SECURITY_2

11. COMMAND_CLASS_SUPERVISION

12. COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2

13. COMMAND_CLASS_BATTERY

14. COMMAND_CLASS_NOTIFICATION_V4

15. COMMAND_CLASS_SWITCH_BINARY

16. COMMAND_CLASS_CONFIGURATION

17. COMMAND_CLASS_SENSOR_MULTILEVEL

18. COMMAND_CLASS_SOUND_SWITCH

3.4. Wake Up Time (Wake Up Time)

The Z-Wave indoor siren is a FLiRS (Frequently Listening Receiver Slave) and therefore does not

require a wake up function. The indoor siren can be controlled by the Z-Wave Gateway at any time.

value

default

range

value

10-600

180 sec

1-1440

30 min

Description of the

Siren's off.

Siren's on.

Description of the

Siren is activated and LED starts flashing

Siren is deactivated and LED goes out

Description of the

Piezo Sirens Alarm duration

Temperature and humidity Transmission interval

English