Audiovox 1181277 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} Audiovox 1181277에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiovox 1181277 8 페이지. Chevrolet s-10 blazer overhead console for use with flipdown video system

페이지 인쇄

FIGURE 1

2. Lower console and disconnect wiring at (2) two

locations. Lay console on workbench for

modification later.

See Figure 2.

FIGURE 3

I. PREPARATION OF VEHICLE INTERIOR

1. Remove the O.E.M. console mounted to inner

roof of vehicle. Remove and discard dome light

cover to gain access to (2) two #8 x 3/4"

screws. Retain screws. Remove and retain (1)

one #8 x 1 1/2" screw located in front of

console near rear view mirror. See Figure 1.

FIGURE 2

3. Using rear edge of opening in headliner, carefully

trim headliner as shown and install mounting

bracket (item 5 pg 2). Make sure the 8" cut is

centered in vehicle. Caution: Before cutting

headliner material, check for wiring or other

componentry above headliner. Cut only where

indicated. Secure front of bracket to roof brace

using (2) two O.E.M. screws, previously

removed, in original locations. Make sure that

bracket is centered in vehicle and secure rear of

bracket to roof brace using (4) four #8 x 3/4"

screws (item 1 pg 2). Install (2) two #8 x 3/4"

screws (item 1 pg 2) in remaining holes next to

O.E.M. screws previously installed.

See Figure 3.