Audiovox 1181292 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} Audiovox 1181292에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiovox 1181292 12 페이지. Overhead console for use with flipdown video system chevrolet suburban

페이지 인쇄

1. Remove the O.E.M. compartment console

currently mounted to inner roof of vehicle.

Remove (1) one # 8 X 1 3/4" screw from recess

in front of console near rear view mirror. Pull

front of O.E.M. console down to access wiring.

Disconnect all wiring from console. Pull console

forward to release rear retainers from inner roof

recess near center of vehicle. Remove console

and lay it in a safe place. See Figure 1.

FIGURE 2

I. PREPARATION OF VEHICLE INTERIOR

2. Turn console over and place on a covered surface.

Remove plastic molded assembly from cloth covered

trim ring. Using a 7/64" drill bit, drill through the

center of the (10) ten plastic pins which secure

console together.

Do not drill deeper than 1/2" or you may drill

through console in some areas. Using a small

chisel, carefully remove the head of the (10) ten

plastic pins. Unsnap the wiring connector secured to

clip on trim ring and separate console from trim ring.

See Fig. 2.

FIGURE 1

See Figure 2. CAUTION: