Apogee Instruments SP-230 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Apogee Instruments SP-230에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Apogee Instruments SP-230 18 페이지. Pyranometer
Apogee Instruments SP-230에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지)

페이지 인쇄

OPERATION AND MEASUREMENT

Connect the sensor to a measurement device (meter, datalogger, controller) capable of measuring and

displaying or recording a millivolt (mV) signal (an input measurement range of approximately 0-250 mV is

required to cover the entire range of total shortwave radiation from the sun). In order to maximize

measurement resolution and signal-to-noise ratio, the input range of the measurement device should

closely match the output range of the pyranometer.

SP-110: The sensor is self-powered and applying voltage will damage the sensor.

SP-230: Only apply voltage to the integrated heaters. The sensor is self-powered and applying

voltage will damage the sensor.

All Apogee un-amplified pyranometer models have a standard calibration factor of exactly:

-2

5.0 W m

per mV