Apogee Sound CA8000DX 사용자 사용 설명서 - 페이지 9

{카테고리_이름} Apogee Sound CA8000DX에 대한 사용자 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Apogee Sound CA8000DX 16 페이지. Professional amplifier
Apogee Sound CA8000DX에 대해서도 마찬가지입니다: 사용자 사용 설명서 (16 페이지)

페이지 인쇄

3. Operation and Usage

3.3 Indicators (cont'd)

TEMP (thermal protection indicator).

This indicator illuminates to warn that the tunnel cooling temperature has risen above 90 degrees centigrade.

If this occurs, the amplifier will be temporarily shut down by the thermal monitor circuit in order to protect

it from damage. The amplifier will start up automatically when the temperature descends to 75 degrees

centigrade. The cause of thermally induced shutdown is typically a blocked air intake or exhaust port.

SIGNAL (signal presence indicator)

This indicator illuminates when signal is present at the amplifier input(s). It functions independently of the

setting of the attenuator (level) controls. Illumination begins when the input signal exceeds -40dB.

4. Cleaning

The control panel and chassis must not be cleaned with any solvent, abrasive or petroleum derived

substance or it may be damaged. When cleaning is required, use a soft cloth, slightly damped with water

and a neutral liquid soap. Be careful that no liquid gets into the amplifier. Never use sharp objects that could

scratch the control panel.

Should liquid get into the amplifier, send the unit to the nearest Apogee Technical Service Center for

inspection and repair.