Apollo Xpander XPA-CB-14021-APO 시운전 매뉴얼 - 페이지 5

{카테고리_이름} Apollo Xpander XPA-CB-14021-APO에 대한 시운전 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Apollo Xpander XPA-CB-14021-APO 19 페이지. Diversity loop interface module
Apollo Xpander XPA-CB-14021-APO에 대해서도 마찬가지입니다: 시운전 매뉴얼 (14 페이지)

페이지 인쇄

Quick Start Guide for XPander Diversity Site Survey

1. Use the site survey tool to

check the signal strength.

2. Record all the survey signal

strengths on the site survey

sheet.

3. Fit the interfaces - as per

instructions in the quick start

guide below.

4. Log the devices on to the

interface - as per instructions in

the quick start guide below.

5. Check the signal strength

for each logged on device and

record on the site survey sheet.

Quick Start Guide for XPander Diversity Loop Interface

1. Select the interface number

or ID (range 1-5).

2. Select channels following

Appendix B and checklist on

the inside of the unit.

3. Set the address for the

system.

4. Log on devices to the

interface (for each interface).

For detailed instructions see page 16

For site survey sheet see page 17

See Quick Start Guide for XPander

Diversity Loop Interface below

For detailed instructions see page 08

For site survey sheet see page 17

For detailed instructions see page 07

For detailed instructions see page 13

For detailed instructions see

Installation Guide 39214-926

For detailed instructions see page 08