Apollo Xpander XPA-TE-14075-APO 시운전 매뉴얼 - 페이지 3

{카테고리_이름} Apollo Xpander XPA-TE-14075-APO에 대한 시운전 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Apollo Xpander XPA-TE-14075-APO 19 페이지. Diversity loop interface module
Apollo Xpander XPA-TE-14075-APO에 대해서도 마찬가지입니다: 시운전 매뉴얼 (14 페이지)

페이지 인쇄

Introduction

XPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface

is connected to the loop. It communicates with the control panel using the Apollo Addressable two-wire power

and communications system. The interface communicates with the detection and alarm signalling devices by

means of radio waves. A maximum of 5 interfaces is permitted for each site. For sites that require more than 5

interfaces please contact Apollo.

The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the Apollo

protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery, detector

contaminated, detector tamper and low signal strength fault conditions.

•

Up to 5 interfaces per site - contact Apollo for more information

•

Up to 31 devices per interface

•

Loop-powered interface (Including bi-directional Short Circuit Isolator)

•

Wireless addresses seen by control panel as normal addresses

•

Radio base with wireless circuitry and battery compartment

•

Optical chamber designed to inhibit dirt penetration and thus reduce false alarms

•

Automatic drift compensation with DirtAlert™ warning

•

Detection algorithms for transient rejection

•

FasTest™ reduces time taken to test detectors

•

Remote test facility

•

5-year battery life (It is recommended that the battery is changed in year 4 of maintenance)

•

Alkaline Panasonic® Powerline or Alkaline Varta® Industrial are the recommended battery types to use

•

Modern styling