Apollo 7100 설치 매뉴얼 - 페이지 8

{카테고리_이름} Apollo 7100에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Apollo 7100 16 페이지. Residential & medium duty commercial slide gate operator

Four 1/2" anchor bolts (not supplied) are

recommended to mount the chassis. The

holes should be drilled with a 1/2"

concrete drill bit.

STEP 1. Set the operator on the pad as shown. Align the sprockets 3 to 5 inches from the inside

surface of the gate.

STEP 2. Mark the four mounting holes on the pad.

STEP 3. Remove the operator and drill the holes according to the anchor bolt manufacturers in-

structions.

STEP 4. Replace the operator and fasten to the pad.

Chain path

(Make sure

the chain

path clears

all posts and

obstacles).

OPERATOR INSTALLATION

TOP VIEW

3"- 5"

Mounting

Holes (4)