ADE Barbara BA 914 사용 설명서 - 페이지 4

{카테고리_이름} ADE Barbara BA 914에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ADE Barbara BA 914 8 페이지.

There is a little push button right beside the battery case at the bottom side of the scale

for country specific settings with the optkln to switch from kg

kilogram to Ib

pound or

to st:lb

stone: pound. Please pay attention to use the scale under consk:leration of your

country specific unit of weight.

4. Programming / Enter of personal data

Before first time use your personal data like gencler (female or male), age and body

height must be programmed and

saved

under selected locations PO - P9 (up to 10

persons).

The

scale is equipped with highly sensitive touch buttons. The touch buttons

are located below the display. To enter your personal data please utilise the buttons: SET

(on and save button), T (Plus button), ... (minus button) and folaw the particular points:

1. Ughtly touch the SET-button. The display indicates flashing "PO". To select your

personal locatkln (PO - P9), touch the ... - or .. -button. After the selection of your

personal location, touch the SET-button to save the reading.

2. After you've selected your personal location (e.g. P3), the symbol for gencler starts to

flash. To select the requested gender (Y male oni female), touch the ... - or .. -button.

After the selection of your gencler, touch the SET-button to save the reading.

3. After you've selected your gencler (e.g. female), the symbol for age starts to flash

(default age 30). To enter your age, touch the ... - or .. -button. After the selection of

your age, touch the SET-button to save the reading.

4. After you've selected your age, the symbol for body height starts to flash

(defau~

170 em). To enter your body he9ht, touch the ... - or .. -button. After the selection of

your body height, touch the SET-button to save the reading.

The scale indicates once again your selected personal data. That settles the completion

of input and the scale returns to the indication "0.0 kg". The scale is ready to use and

you may now start your body analysis. Without further

activ~

the scale automaticaily

power-off. Your personal data are stored.

If you push the ... - or .. -button within 2 seconds after the first complete input, you can

directly enter the personal data of a further person. Altematively, you repeat the complete

steps listed below for further entries of personal data.

5. Weighing function (weight measurement only)

1. Switch-on the scale by using the tap-on-function. For this, tap with your foot short and

firm on the scale.

The

display indicates all symbols and a few seconds later

"0.0 kg". Now the scale is ready to use.