Datamax A Class Mark II 설치 지침 매뉴얼 - 페이지 9

{카테고리_이름} Datamax A Class Mark II에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datamax A Class Mark II 14 페이지. Cutter option

M) Tighten the Vertical Mounting Screw.

Position the Cutter Assembly so that

media will pass through the middle of the

Cutter Throat then tighten the top two

Long Mounting Screws. Next, loosen

the Vertical Mounting Screw one-half

turn then press down on the Lower

Mounting Block and tighten the bottom

two Long Mounting Screws. Retighten

the Vertical Mounting Screw. Then,

tighten the Short Mounting Screw and

the Thumbscrew.

N) Connect the Cutter Cable to the Cutter

Port, and then affix the Warning Label

(Item 12) to the Cutter Assembly, as

shown.

O) If removed from the applicator system,

reinstall the printer. Reconnect all

interface cabling.

Short

Mounting

Screw

Thumbscrew

Cutter

Assembly

Cutter

Throat

Cutter Port

Warning

Label

Cutter

Assembly

Vertical

Mounting

Screw

Long

Mounting Screw

(4 places)

Lower

Mounting Block

Cutter

Cable