ADE KWE15-IP68 운영 매뉴얼 - 페이지 4
{카테고리_이름} ADE KWE15-IP68에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADE KWE15-IP68 16 페이지. Compact scale in stainless steel housing
페이지 인쇄
Place the metal weighing tray on the platform.
Connect the mains adapter to the scale.
2.3
Power supply of the scale
Power supply is by mains with directly connected power plug (230V) or with rechargeable
batteries (only for models with rechargeable batteries).
The battery pack is already installed in the base of the scale.
For the first loading of the rechargeable batteries please take the power line cable out of the
battery box inside the scale (at the bottom side of the scale) and connect it with the local
electricity grid. Complete first charging of power-packs needs approx. 10 hours. Please make
sure that the local voltage supply corresponds to the indication printed on the adapter.
2.4
Power immediate operation
Working with mains all three LCD („High", „Mid", „Low") are on.
For models with rechargeable batteries:
• All three segments lighting = Power voltage of rechargeable batteries is more than 6.3V,
• Two segments lighting = Power voltage of rechargeable batteries is between 6V und
6.3V,
• One segment lighting = Power voltage of rechargeable batteries is under 6V.
2.5
Power Charge Operation (only for models with rechargeable batteries):
When the power voltage indicator shows just one segment, scale should be charged by the
charger in battery storehouse. If not, the scale would turn off in between 15 minutes.
Full charging needs about approx. 10 hours.
The battery should be charged at least once every 3 months.
If the running time gets more and more less, rechargeable batteries have to be replaced. Please
contact your local dealer.
Please take sure that used voltage is 230V/50Hz.
3
KWE-190107-Rev008-UM-en