ADE M112600 운영 매뉴얼 - 페이지 5

{카테고리_이름} ADE M112600에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADE M112600 12 페이지. Electronic baby scale

The baby may be weighed on a soft pad like a towel or even a soft paper. The weight of such

objects can be tared off in order not to influence the weighing result of the baby.

This can be done in in different ways:

1. Place the selected object on the baby tray before switching on the scale. The scale will

now find the zero point including the weight of the object.

2. To start up the scale press the ON / TARE key.

3. During a function test you will recognize 3 times blinking of ‚8888' on the display before

the indication changes to zero (0.000). The scale is now ready for operation.

4. In case you prefer to put the soft pad after start up, place the object on the tray and

press the ON / TARE key. The scale will tare off the weight of the object and come

back to zero (0.000) (see also explanation of Tare Function below).

5. Place the baby on the weighing tray.

6. The display will indicate the babies' weight and automatically starts blinking once it

reached a standstill. In case the baby remains on the tray for a while the blinking weight

indication remains on the display for another 5 minutes before the scale shuts off

automatically.

Taking the baby off the tray while the weight result is still blinking the display will come

automatically back to the zero indication (0.000) before switching off automatically after

5 minutes.

7. For manual switch off hold key ON / TARE pressed for abt. 3 seconds.

By using the tare function any unrequested weight (for example a nappy or babies' clothes)

can be subtracted.

1. Start up the scale and wait ‚0.000' to be indicated on the display.

2. Place objects like nappy, clothes or other on the tray.

3. Press TARE key and ‚0.000' will appear on the display.

4. Taking the objects off the tray the display will indicate a corresponding negative value.

5. Place baby including objects on the tray.

6. The weight displayed is just babies' weight.

7. In case the value to be tared off is higher than 5 kg, the capacity of the scale reduces

to 15 kg respectively the weight capacity of 20 kg minus 5 kg tare value.

Select the weighing mode (kg or lb) by simply pressing the UNIT key.

M112600-210511-Rev004-UM-e

Use of the scale