ADE M500020 Series 운영 매뉴얼 - 페이지 11

{카테고리_이름} ADE M500020 Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADE M500020 Series 16 페이지. Electronic wheelchair and multipurpose scales

페이지 인쇄

valuating Body Mass Index

BMI evaluation according to WHO

BMI

18.5

BMI

18.5

BMI

Print out a record

The scales must be at standstill, e.g. standstill status display

Press the ENTER key (13) to send the data to the serial interface.

Note: Printing is not possible if the net weight is 0. The print function only produces one print-out. A reset is

required to print out another copy.

Cleaning

Remove the mains plug before cleaning the unit. Do not use any aggressive cleaning materials for cleaning;

only use a damp cloth or conventional disinfectant. Ensure that no liquids or any fluid gets into the scale.

Error messages

Error mes-

sage

Overload display

Overflow indicator (negative)

Overflow indicator (positive)

AD LOW

A/D above negative range

AD HI

A/D above positive range

EE SUM

Parameter or calibration error

EE WR

EEPROM indicates an error

PM SUM

Internal program indicates a check error

HOFSET

Switch on – above zero

LOFSET

Switch on – below zero

UOFSET

Irregular

M500020-210322-Rev009-UM-e

Severely underweight

Moderately underweight

Slightly underweight

Normal weight

Overweight

Obese Class I

Obese Class II

Obese Class III

Care, servicing and recalibration

Description

(14) appears at the screen.

Problem solution

Weight exceeds max. capacity of the

scales.

Negative weight indicated – weight too

low to be displayed (<=99999).

Positive weight indicated – weight too

high to be displayed (>=999999).

Check if the scales are correctly as-

sembled or if they are damaged.

Check if the scales are correctly as-

sembled or if they are damaged.

Recalibrate – please contact your sup-

plier or service partner:

Please contact your supplier or service

partner.

Please contact your supplier or service

partner.

Please remove the weight from the

scales and restart.

Check scales for damage and inform

your service partner:

Do not touch the scales after they have

been switched on.