ADE M501020 운영 매뉴얼 - 페이지 8
{카테고리_이름} ADE M501020에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADE M501020 20 페이지. Electronic wheelchair scales
페이지 인쇄
Status displays
The
ADE-MAK
display has a series of LCD status displays which provide information about the value
shown:
NET status indicator (5):
LCD on - the net weight is shown on the display.
LCD off - the gross weight is shown on the display.
Status indicator
LCD on - the weight is within ¼ of a calibrated value from the zero point.
LCD off - the weight is outside ¼ of a calibrated value from the zero point.
Standstill status indicator
LCD on - the scales are at standstill (prerequisite e.g. for print and tare functions).
LCD off - the scales are not at standstill.
Status indicators lb, kg, oz, and g (16, 17, and 18):
LCD on - the weight is displayed in the corresponding unit: lb = pounds, kg = kilogram,
oz = ounce, g = gram.
The units shown can be set to primary and secondary units. Both units can be freely selected by the
user. In weight mode, the UNITS key (12) can be used to change between primary and secondary
units.
Examples:
–
If the primary unit is pounds (lb) and the secondary unit is kilograms (kg), the lb LCD will be on for
the primary units and the kg LCD will be on for the secondary units.
–
If the primary unit is kilograms (kg) and the secondary unit is pounds (lb), the kg LCD will be on
for the primary units and the lb LCD will be on for the secondary units.
Connecting ancillary equipment
It is possible to connect ancillary equipment such as a printer, PC or remote display (interface
RS-232).
The serial interface is connected to the SUB-D connection, 15-pole (cf. Fig. 2-1 and 2-2).
The PC connection only supports the RS-232 interface. The printer connection offers both an active
20mA output and also the RS-232 interface.
Both interfaces are configured via the SERIAL menu.
EDP port (RS-232C, can be used for PC, printer or remote display)
To Personal Computer
To Printer or Remote Display
8
(6):
(14):
M501020-210322-Rev006-UM-e