Austdac HUBBUS HBLTU 사용자 설명서 - 페이지 9
{카테고리_이름} Austdac HUBBUS HBLTU에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Austdac HUBBUS HBLTU 12 페이지. Termination unit
페이지 인쇄4 Installation
4.1 ENCLOSURE
The HBLTU should be mounted in a host enclosure providing protection against dust and
moisture. A minimum ingress protection of IP54 is recommended.
4.2 MOUNTING
The HBLTU should be mounted on an NS 35 DIN rail.
4.3 TERMINALS
All connections to the HBLTU are via screw connection with tension sleeve terminals
around the base of the DIN rail mounting enclosure.
Maximum cross section of solid core conductor: 2.5mm
•
•
Maximum cross section of stranded conductor with ferrule: 2.5mm
Minimum cross section of solid core conductor: 0.2mm
•
Minimum cross section of stranded conductor with ferrule: 0.25mm
•
HubBus Line Termination Unit
HBLTU USER MANUAL
9 OF 12
2
2
2
2
125-258-12
Issue: 01