Airwell X 4650 설치 및 유지 관리 매뉴얼 - 페이지 11

{카테고리_이름} Airwell X 4650에 대한 설치 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Airwell X 4650 20 페이지.

INSTALLATION

The unit is not designed to withstand weights or stresses from adjacent equipment, pipe work or

constructions. Any foreign weight or stress on the unit structure could lead to a malfunction or a

collapse with dangerous consequences for personnel and property. In such an event, the warranty

shall be null and void.

1. on the connection side

2. for total rear air intake

3. for front air discharge with plenum accessory

4. for direct vertical air discharge

RESPECT MINIMUM CLEARANCES SPECIFIED AROUND THE UNIT.

The unit base shall be arranged as indicated in the manual. There could be a risk of personal injury

or damage to property in the event of the unit being incorrectly supported.

The unit must be installed on a firm level foundation, of adequate strength to support its full operating weight.

1. It must be high enough to permit good drainage of condensates with siphon

2. The unit must be pitched slightly towards condensate drain outlet to provide positive drainage of

condensates.

3. keep duct connections to a minimum to reduce duct losses.

4. When locating unit give consideration to, and locate unit as remote as possible minimise noise.

5. All electrical and ductwork connections to the unit must be made via flexible connections to prevent

transmission of vibration.

6. In addition to the service clearances noted on the dimension sheet it is essential that provision is

made for adequate and safe service access.