Australion monitor AMIS23X 설치 및 운영 매뉴얼 - 페이지 8

{카테고리_이름} Australion monitor AMIS23X에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Australion monitor AMIS23X 10 페이지. Stereo 2-way/mono 3-way crossover

19. Fuse Holder.

The AMIS23X has a 500mA mains voltage fuse.

Modes of Operation

2 Way Stereo

When using the AMIS23X in 2 way stereo mode, firstly ensure the Stereo/Mono

Mode switch (7) is set to the correct position (switch "out"), then simply patch

the left line level output signal into input 1 (16 or 17) & the right line level

output signal into input 2 (8 or 9). Connect low output 1 (13 or 14) & low

output 2 (4 or 5) to your low frequency amplifiers. Connect the Channel 1

high output (10 or 11) & the channel 2 high output (1 or 2) to your high

frequency amplifiers.

3 Way Mono

When using the AMIS23X in 3 way mono mode, firstly ensure the Stereo/Mono

Mode switch (7) is set to the correct position (switch "in"), then simply patch

the line level output signal into input 1 (16 or 17). Connect low output 1 (13 or

14) to your Low frequency amplifiers, connect low output 2 (4 or 5) to your

mid frequency amplifiers & connect high output 2 to your high frequency

amplifiers. In this mode ensure Channel 1 Range Selection Switch (7) is set to

X1 & Channel 2 Range Selection Switch (7) is set to X10,& that both Channel

2 High Level (10) & Channel 2 Input Level (4) are set to '0'.

AMIS23X Specifications

1. Frequency Range;

2. Frequency Response;

3. S/N Ratio;

x1:

80Hz – 920 Hz

x10:

800Hz – 9.2 kHz

20 Hz – 20 kHz

Low Frequency Output @ 0dB <-106dBu

High Frequency Output @ 0dB <-97dBu