ADE Spezial MZ10028-01 운영 매뉴얼 - 페이지 7

{카테고리_이름} ADE Spezial MZ10028-01에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADE Spezial MZ10028-01 12 페이지. Mechanical baby length measuring

ADE Spezial MZ10028-01 운영 매뉴얼

Preparation and Initial Start-up of the Length Measuring

This symbol means: "Consult operating instructions". To achieve accurate
results, read the instructions for use carefully before use and follow all
instructions provided therein. Keep the instructions for use for future reference.
Your ADE-Mechanical Baby Length Measuring is a high quality product. This Baby Length
Measuring is suitable to use for paediatricians, in children's hospital, for home visits by
midwives and is qualified for a body-length up to 100 cm.

Carton Contents

 1 Baby Measuring-Rod
 2 Measuring Tongues
 1 Operating Manual

Assembling

In order of a space-saving transport, the enclosed measuring tongues are not in a mounted
status. Remove the parts out of the packing.
Sliding Carriage
Detail A
Plug-Axle
Spring
Detail A
6
Locking Screw
Measuring
Tongue
Gauge Mark
A
5. Screw off the locking screw.
6. Extract the plug-axle and spring.
7. Push the plug-axle through the drilled hole of
the measuring tongue and stick both at the
sliding carriage.
Pay attention that the arched side of the
measuring tongue face upward (Detail B)
and the nib at the sliding carriage snap
into the groove of the measuring tongue
(Detail A).
8. Attach the spring on the plug-axle and screw
the locking screw again onto the plug-axle.
Detail B
MZ10028-01-210420-Rev002-UM-de-e