AUSTRIAN GAMING INDUSTRIES NOVOSUPERVISION FV-626 CF2 매뉴얼 - 페이지 8
{카테고리_이름} AUSTRIAN GAMING INDUSTRIES NOVOSUPERVISION FV-626 CF2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AUSTRIAN GAMING INDUSTRIES NOVOSUPERVISION FV-626 CF2 20 페이지. Kernel 8.2
페이지 인쇄1
L E G E N D A N D S A F E T Y P R E C A U T I O N S
S A F E T Y P R E C A U T I O N S
Caution - Continuation
CAUTION
In the situations described below there is a risk of damage to equipment.
•
Ensure suitable ambient conditions!
Suitable operating temperatures range from 10º C to 35º C!
Ambient humidity should be between 30 % and 80 % (not condensing)!
Excessive temperatures and humidity may cause a fire hazard, short circuit or other damage!
Suitable for indoor use only.
Do not expose the machine under any circumstances to rain or temperatures greater than 50º C.
The operating temperature must not exceed 35º C.
If the machine has been exposed to very low temperatures, do not power it up immediately. Allow for
the machine to reach room temperature.
The operation humidity must be between 30 % and 80 % (not condensing).
Do not install the machine near powerful heaters (heating radiators).
Do not install the machine in locations with rapidly changing temperatures or excessive dust.
•
Unauthorised alterations and modifications of the machine are prohibited for safety reasons
and void the warranty!
For safety reasons any exchange of defective parts has to be accomplished with original or
manufacturer-approved parts.
Spare parts that were not delivered by Austrian Gaming Industries are not tested and not approved by
Austrian Gaming Industries.
The manufacturer accepts no liability for damage that results from the use of components and spare
parts that are not original or manufacturer-approved.
8
45M626U1DE-02
© 07 2008 AGI GmbH