Austro Flamm 45x51 K 사용 설명서 - 페이지 10

{카테고리_이름} Austro Flamm 45x51 K에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Austro Flamm 45x51 K 17 페이지.

4. Operating elements

The Austroflamm inserts stand out because of their simple operation.

convection air outlet

combustion/convection air inlet

operation of the combustion

air control

door lock

operation lever for combustion air

+ = maximum air supply for fast burning

I = average heat output

– = small heat output.

•

hinged door mechanism

– press handle outwards: door unlatches – pull open.

Door can be swung open.

„release":

Release the door handle in an open position (angle > 20° ), door closes and locks automatically and the

insert is ready to be used.

•

sliding door mechanism

–

lift = door open

–

pull down = door closed

• deflection damper heat exchanger

– turn to the right: flue gases will be conducted into the heat

exchanger. This may be executed only if the insert door is closed.

– turn to the left: flue gases will be conducted directly into the chimney. The insert door may be opened

only in this position

• throttle valve

– turn to the left: flap closes.

– turn to the right: flap opens. Flue gases exit through the chimney. The insert door

may be opened now.

allowed fuel

dry, well-seasoned and natural wood (preferably hard wood) or wood briquettes.

clean combustion

the fuel wood must be dry (wood moisture < 15 %) and untreated. Moreover it is very important to use the

correct quantity of wood, in order to reach a clean and low-emission combustion. Apart from a low caloric value,

moist wood also makes your insert's glass panes soot faster than necessary. A sooting after 2-3 times of use is

normal. If you use fuel for heating which is not allowed, all guarantee or warranty claims ends

immediately!