BENDIX BDW 60 지침서 - 페이지 7

{카테고리_이름} BENDIX BDW 60에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. BENDIX BDW 60 20 페이지. Dishwasher
BENDIX BDW 60에 대해서도 마찬가지입니다: 지침서 (20 페이지), 지침서 (20 페이지)

페이지 인쇄

Using your appliance

Loading your appliance

Before placing dishes in the machine, remove any scraps of

food, to avoid clogging the filters and consequently reducing

the performance.

Do not load very small items which can fall through the

baskets.

Open the door and slide out the baskets to load the dishes.

The lower basket

The lower basket is designed to take saucepans, lids, plates,

salad bowls, cutlery etc.

Serving dishes and large lids should be arranged around the

edge of the basket, ensuring that the upper spray arm can turn

freely.

UI49

The cutlery basket

Long bladed knives stored in an upright position are a

potential hazard.

These items should only be places in the removable knife

basket.

Take care when loading or unloading sharp items such as

knives.

Removable knife basket

Long and/or sharp items of cutlery such as carving knives

must be placed horizontally in the removable knife basket

provided, to be positioned at the rear of the upper basket.

UI53

Cutlery should be placed in the removable cutlery basket with

the handles facing downwards. If the handles protrude from

the bottom of the basket, obstructing the lower spray arm, load

the cutlery with the handles facing upwards.

Mix spoons with other cutlery to prevent them from sticking

together.

For best results we

recommend you to use the

cutlery grid provided (if the

size and dimensions of the

cutlery allow it).

UI19

UI71

The upper basket

The upper basket is designed for plates (dessert plates,

saucers, dinner plates of up to 25 cm in diameter), salad

bowls, cups and glasses.

Arrange items on and

underneath the cup racks so

that water can reach all

surfaces.

Glasses with long stems can

be placed upside down in the

cup racks.

Light items (plastic bowls

etc.) must be loaded in the

upper basket and arranged

so they do not move.

In case that plates are loaded in the upper

basket:

load them starting from the

rear positions of the

basket; tilting them slightly

forwards and avoiding the

front positions near the

door.

Before closing the door, ensure that the spray arms can

rotate freely.

Adjusting the height of the upper basket

If washing very large plates (over 27 cm and up to 32 cm in

diameter) you can load them in the lower basket after moving

the upper basket to the higher position.

To move to the higher position proceed as

follows:

1. Move the front runner

stops (A) of the upper

basket outwards and slide

the basket out.

2. Refit the basket in the

higher position and

replace the stops (A) in

their original position.

When the top basket is in

the higher position it will only take plates up to 20 cm in

diameter and you will not be able to use the cup racks.

After loading your machine always close the door, as an

open door can be a hazard.

US47

US71

RC01