Airwheel Q3 사용자 설명서 - 페이지 8

{카테고리_이름} Airwheel Q3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Airwheel Q3 19 페이지.
Airwheel Q3에 대해서도 마찬가지입니다: 제품 일러스트레이션 (2 페이지)

4.2 Getting Started

Place Airwheel vertically on the ground and tum it on. The Power Level LED Indicators

will be on and the buzzer will beep, and the unit is ready to use.

If Airwheel tilts either forward or backward after powered on, please wait until it

adjusts to upright position before riding.

A four-bar LED indicator is applied to indicate the power level. All fours will be lit when

power level is over 85% and will go off one by one as the level drops. Please check

power level every time before usage to ensure there is enough power for a return trip.

You may recharge it every time after usage.

When power level falls lower than 15%, all four ligh1s will blink and the buzzer will beep.

The front end of the pedal will rise to force you to decelerate and eventually slop.

Please do not attempt to ride again, otherwise you may suffer a sudden loss of power

and fall over.

Duration range will be limited during winter, since the battery performance drops

sharply in cold weather. For instance, at -15t, the discharge capacity is only about half

compared to that at room temperature.

To prevent injuries caused by over speed, Airwheel sets a maximum speed. When

speed exceeds 12km/h, the front end of the pedal will rise gradually and when the

speed exceeds 16km/h, the pedal will pose a 10' angle to the leveling surface, which

stop you from inclining further to accelerate. The pedal will flatten itself gradually as

the speed decreases.

Please do not lean further to accelerate when approaching the

NOTE:

maximum speed.

Battery level indicator

Web:

www.airebike.com