Airwheel R6 사용자 설명서 - 페이지 5

{카테고리_이름} Airwheel R6에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Airwheel R6 12 페이지.

Use the Bicycle

Lifting rod lock

Figure 2

Take R6 from the box, open the lifting rod lock (see Figure 1 - ① arrow), insert the front into the folding riser (see

Figure 1 - ② arrow), then close the lock, push the head to the vertical (See Figure 2); fold the handle down (see Figure

3 - ③ arrow) to catch the groove, and then buckle up (see Figure 4- ④ arrow); open the saddle lock, install the saddle

and adjust to suitable height(See Figure 5- ⑥arrow); then turn the brakes and dashboard to the horizontal position (see

Figure 6), tighten the screws on brakes to fix the brakes (see Figure 7).

Figure

Install the pedals (See Figure 8), L for left and R for right. Please pay attention to the installation of the screw

thread. The left pedal is counterclockwise tightened, right pedal clockwise tightened, and the recommended pedal

torque is 35 ~ 40N.m. Start the power (see Figure 9), release the locking handle (see Figure 10- ⑦ arrow); set right

the bike body and put the adjustable switch in the extended gear (see Figure 11). The body automatically unfolds,

and when finishes, put the adjustable switch in the stop gear, close the locking handle, turn off the power (see

Figure 12).

①

②

Figure 1

Folding

handle

④

Figure 4

Power switch

Figure

Extended gear

Adjustable switch

③

Folding

handle

Figure 3

⑤

Saddle lock

⑥

Figure 5

Figure

- 05 -

Screw

Figure 6

⑦

Locking

handle

Figure

Figure 7