Gaggenau VG 231 AU 작동 및 조립 지침 매뉴얼 - 페이지 18

{카테고리_이름} Gaggenau VG 231 AU에 대한 작동 및 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggenau VG 231 AU 19 페이지. Gas cooker
Gaggenau VG 231 AU에 대해서도 마찬가지입니다: 설치 지침 (4 페이지)

페이지 인쇄

distance in mm

Fig. 14

See table on Page 10 for details of nozzle settings.

Air gap

Fig. 15

First air regulation

First air regulation may be necessary to always

achieve a stable and low-noise flame in the event of

deviating gas types and pressures.

First air regulation for outer burner (Fig. 14)

After undoing the screw (2) (7 mm), move the air

regulation sleeve (1) in the direction of the nozzle

(3)or away from the nozzle up to a maximum

distance of 12 mm until the flames burn stably and

with low noise. Yellow tips must not be visible in the

flames. The flame must not go off when you switch

swiftly from the high to the low setting. Firmly screw

in the screw (2) again.

First air regulation for outer burner (Fig. 15)

The throttle spring (4) is generally positioned on

the hexagon shaft. If required, shift the throttle

spring. For exact details, refer to the table entitled

"Air gap for inner burner". The air gap must

never be entirely sealed off.