Great Lakes GL600E-2432 설치 지침 매뉴얼 - 페이지 6

{카테고리_이름} Great Lakes GL600E-2432에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Lakes GL600E-2432 13 페이지. Equipment cabinet/rack

FIELD REVERSIBLE FRONT & REAR DOORS

The front and rear doors are installed right hand hinge as standard

from the manufacturer. Removing the hinges allows you to reverse

the door by flipping them over and reinstalling the hinges using the

universal mounting holes. Begin both screws, then tighten while

maintaining perfect vertical alignment. See detail below. All cabinet

frames and doors have provisions to be hinged right or left hand. The

handle can be reversed along with the hinging. See Operating Handle.

HINGE MOUNTING

Reversible

Hinge (Female)

Flat Head

Phillips Screw

# 10-32 x 1/2

SIDE PANEL REMOVAL

The side panels are secured to the cabinet frame with two quick

release latches and a keyed lock. Be sure to unlock the side panel.

To remove the side panel, squeeze the quick release latches towards

each other. Then tilt the top of the side panel out slightly and lift the

side panel up a couple of inches until it is free. To install the side panel,

reverse the process. Make sure the slots on the side panel engage with

the two tabs at the bottom of the frame.

SIDE PANEL REMOVAL

Keyed Lock

Slam

Latch

DOOR DETAIL

Tilt

Pivot Washer

Reversible

Hinge (Male)

Flat Head

Phillips Screw

# 10-32 x 1/2

FRAME DETAIL

Lift