GREAT PLAINS 8548DV 현장 조정 매뉴얼 - 페이지 2

{카테고리_이름} GREAT PLAINS 8548DV에 대한 현장 조정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GREAT PLAINS 8548DV 4 페이지. Disc-o-vator

Hydraulic Hose Hookup:

Great Plains hydraulic hoses have color coded handle

grips to help hookup hoses to the tractor outlets. Hoses

with the same color use the same remote.

Use the following table to assist with hooking up the

implement:

Color

Black

Green

Red

"Brakes"

Hydraulic trailer brakes (option)

Leveling The Machine Front To Rear:

Note: Prior to leveling the machine front to back, remove

the transport locks and unfold the machine on a level sur-

face.

1) Lower the machine so that the sweeps are 2 to 3

inches off of the ground on the center frame.

2) Using a wrench loosen the jam nut (1).

3) Adjust the turnbuckle at either adjustment nut (2) so

that the front of the machine runs slightly deeper then the

back.

4) Once properly adjusted, re-tighten the jam nut (1).

Leveling The Machine Side To Side:

Wings should be adjusted to match the center section of

the machine.

1) Adjust the eye bolt on each wing to match the center

section. Lengthening the bolt will shallow up the wings

while shortening the bolt will allow the wings to run

deeper.

Document

#TLUS200C-0001A

Hydraulic Function

Lift (2 hoses)

Fold (2 hoses)

Gang (2 hoses)

Hydraulic hookup example

48475

48828

48829

2 of 4