Great Power Engine GP-61 소유자 매뉴얼 - 페이지 5
{카테고리_이름} Great Power Engine GP-61에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Power Engine GP-61 10 페이지.
Great Power Engine GP-61에 대해서도 마찬가지입니다: 사용 설명서 (14 페이지)
페이지 인쇄
cooling for an air cooled engine.
Caution: It is important to use seals to protect openings in order to prevent sawdust, residual
abrasives etc., from entering the engine's interior when the engine is being mounted in the model.
Ensure the cleanliness of the interior of the fuselage. Also ensure that all parts are tight and in
place so that they will not be sucked into the engine.
Turning the needle clockwise LEANS the fuel mixture. Turning the needle counterclockwise
RICHENS the fuel mixture. The general starting points of the needles are as follows:
GP-61
GP-88 STD& EVO
GP-123
GP-176 STD& EVO
Needle settings will vary according to different conditions, such as altitude, temperature, fuel
carb variances, humidity, and so on.
Caution: The adjusting needles must not be tightened with too much strength as this can cause
damage to the needles. If the needles are damaged, it will no longer be possible to make
adjustments to the carburetor and a new one must be obtained.
Make sure the propeller bolts are all tight and secure.
1.!
Make sure the area is clear of any kind of loose debris, sand, dirt or gravel.
2.!
Have someone with eye protection firmly hold the plane. At least two people are required
3.!
to start the engine.
We strongly recommend wearing heavy leather gloves when starting the engine.
4.!
Switch on the radio system and confirm that all controls work correctly and are in the
5.!
correct direction. Ensure that you have the throttle cut switch set to fully close the throttle
!
Needle Setting
Low Needle
1 ½ open on the Low needle
1 ½ open on the Low needle
2 open on the Low needle
¾ open on the Low needle
Starting Procedure
%!
High Needle
1 ½ open on the High needle
1 ½ open on the High needle
1 ½ open on the High needle
1 ½ open on the High needle