Gaggia STIRO PROFESSIONAL 매뉴얼 - 페이지 10
{카테고리_이름} Gaggia STIRO PROFESSIONAL에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gaggia STIRO PROFESSIONAL 20 페이지.
페이지 인쇄GAGGIA Libretto
23-04-2002
USE INSTRUCTIONS
The appliance was designed for maxi-
mum ease of use.
The tank contains cold water and,
therefore, filling is absolutley safe and
can be done quickly at any time.
This means you can iron non-stop with-
out any long pauses while waiting for
the boiler to fill.
A shortage of water in the tank is indi-
cated by the indicator-light (9) going
on.
FILLING THE WATER TANK
• Pull up the tank plug (5) (fig. 1) and
fill the tank with about 0.8 litres of
water, taking care not to allow the
tank to overflow.
• Put back the plug (5).
• Fit the power plug (10) into a suit-
able, earthed socket.
• Turn the switch/commutator (4) into
position 1 (supplying power to the
generator + iron) - the steam pres-
sure indicator-light (8) lights up.
HOW TO USE THE IRONING SYSTEM
Steam ironing
• Shift the iron temperature control
knob (2) in the steam zone (see sym-
bol in fig. 2). At this temperature, you
can steam iron any type of fabric.
• Wait for the steam pressure indicator-
light (8) to go off (less than three min-
utes). Press the iron steam control
push-button (1) for the first time to
release the air inside the boiler and
steam tube. During this first opera-
tional stage, some small drops of
water caused by condensation may
come out together with the steam.
We advise you to direct the first jet
10:51
Pagina 8
toward a cloth. A few moments later,
the steam indicator-light (8) goes off
again and you can begin to iron in
the normal way (fig. 3).
• During operation, the steam pres-
sure indicator-light (8) goes on and
off automatically according to steam
consumption. At this stage, you may
hear the generator buzzing at inter-
vals. This noise is caused by the
pump re-loading water into the boil-
er. Carry on ironing in the normal
way.
• To vary the quantity of steam accord-
ing to type of fabric (depending on
how delicate it is), turn control knob
(7) anticlockwise (to increase) or
clockwise (to reduce) (fig. 4).
• A mat is supplied for parking the
iron. The mat is in high temperature
resistance material, and can be
placed on any surface (fig. 5).
Dry ironing
• For steamless ironing, turn the
switch/commutator to position 2.
• Set the iron's knob (2) to the
required temperature.
• Wait for the iron indicator-light (3) to
go off. Begin dry ironing without
using the push-button (1) because
no steam is being produced.
8