GAI-Tronics PHP400 설치 및 사용자 설명서 - 페이지 3
{카테고리_이름} GAI-Tronics PHP400에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GAI-Tronics PHP400 20 페이지. Analogue version (1090/1099 series) with ampetronic hls-dm2 induction loop amplifier 230v ac power supply
GAI-Tronics PHP400에 대해서도 마찬가지입니다: 디자인 설치 및 사용 설명서 (20 페이지), 설치 및 사용자 설명서 (20 페이지)
페이지 인쇄
Safety and Care Information
1.
IMPORTANT: THIS EQUIPMENT CONTAINS HAZARDOUS VOLTAGES
▲
THIS EQUIPMENT MUST BE EARTHED
▲
MAINS SUPPLY MUST BE ISOLATED ELSEWHERE BEFORE OPENING THE
▲
CASE.
Cabling and connections must be in accordance with local electrical safety
▲
regulations (such as BS7671 17th edition IEE regulations).
Mains connection must be made via a 2 pole disconnection device, with a
▲
minimum contact clearance of 3mm.
Please read these instructions thoroughly before starting installation. These
▲
products must be installed by competent personnel familiar with telephone
installation.
Battery
▲
Do not use any other battery other than the one supplied with the GSM
terminal.
Operating environment
▲
Make sure that no special regulations are in force that impose restrictions on
the use of mobiles. Restrictions to mobiles would also apply to the GSM Help
Point. These could include for example potentially explosive atmospheres or
proximity to medical equipment.
The fitted aerial is rugged but has limited resistance to deliberate damage or
▲
vandalism. The aerial can be mounted remotely if appropriate, see section 4.6
Product Description and Features
2.
This manual describes the GSM version of the GAI-Tronics 400mm circular Help Point.
This product is based on the standard 1090/1099 Help Point product range and has
been specifically configured for use on rail platforms, with features including:
Weather and vandal resistant casing
•
Large, palm-operable, vandal resistant buttons
•
Raised text and Braille legends
•
Internal induction loop
•
Integral, vandal resistant aerial
•
Quad band GSM module, accepts SIM from any network (SIM not supplied).
•
Wide operating temperature range
•
Auto-dial numbers are remotely programmable
•
230Vac powered
•
4 auxiliary inputs, 2 volt-free contact outputs
•
Models are available with different pushbutton options.
The Help Point is essentially an analogue Help Point module, connected to a GSM
terminal contained within the same casing.
PHP400 GSM Help Point.
3