Automationdirect.com Productivity 2000 P2-07B 매뉴얼 - 페이지 4

{카테고리_이름} Automationdirect.com Productivity 2000 P2-07B에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Automationdirect.com Productivity 2000 P2-07B 8 페이지. Base

Panel Mounting Requirements

Enclosures

Your selection of a proper enclosure is important to ensure

safe and proper operation of your Productivity2000 system.

Applications for the Productivity2000 system vary and may require

additional hardware considerations. The minimum considerations

for enclosures include:

• Conformance to electrical standards

• Protection from the elements in an industrial

environment

• Common ground reference

• Maintenance of specified ambient temperature

• Access to the equipment

• Security or restricted access

• Sufficient space for proper installation and

maintenance of the equipment

Mounting Position

Mount the bases horizontally, as shown in the illustration, to provide

proper ventilation. Do not mount the bases vertically, upside down,

or on a flat horizontal surface.

Mounting Clearances

Provide a minimum clearance of 2" (50mm) between the bases and

all sides of the enclosure. Allow extra door clearance for operator

panels and other door mounted items. There should be a minimum

of 3" (76mm) clearance between the base and any wire duct, and

a minimum of 7.2" (183mm) from base to base in a multiple base

installation.

www.productivity2000.com

AIRFLOW

Tech Support 770-844-4200

NOTE: Add

NOTE: Add 2" to mounting

depth when

depth when using ZIPLink

cable.