ADEMCO 6127 사용자 설명서

{카테고리_이름} ADEMCO 6127에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ADEMCO 6127 9 페이지. Vista-20se/vista-20hwse
ADEMCO 6127에 대해서도 마찬가지입니다: 빠른 매뉴얼 (3 페이지)

Ademco Vista-20SE/Vista-20HWSE

General

This system offers you three forms of protection: burglary, fire and emergency. Your system consists of at least one

keypad that provides control of system operation, and includes various sensors that provide perimeter and interior

burglary protection, plus smoke or combustion detectors designed to provide early warning in case of fire.

Zones

Your system's sensing devices have been assigned to various "zones." For example, the sensing device on your Entry/Exit

door may have been assigned to zone 01, sensing devices on windows in the master bedroom to zone 02, and so on.

These number will appear on the display, along with a description for that zone (if programmed), when an alarm or

trouble condition occurs.

Burglary Protection

Your system provides four modes of burglary protection: stay, away, instant and maximum, and allows you to bypass

selected zones while leaving the rest of the system armed. You must turn on or "arm" the burglary protection portion of

your system before it will sense burglar alarms. The system also provides a chime mode, for alerting users to the

opening of protected doors and windows while the system is disarmed. Refer to the other sections of this manual for

procedures for using these features.

The following table lists the four different arming modes and the results of each: