DBI SALA Hot Work NANO-LOK SRL 3101523 사용 설명서 - 페이지 12
{카테고리_이름} DBI SALA Hot Work NANO-LOK SRL 3101523에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DBI SALA Hot Work NANO-LOK SRL 3101523 15 페이지. Self retracting lifelines
페이지 인쇄
4.7
AERIAL WORK PLATFORMS:
1.
should be used.
Aerial work platforms must have guardrails or gates at all accessible edges along their perimeter unless anchorages
4.8
HORIZONTAL SYSTEMS:
5.0 INSPECTION
5.1
i-Safe™ RFID TAG:
5.2
INSPECTION FREQUENCY:
Frequency"
5.3
UNSAFE OR DEFECTIVE CONDITIONS:
5.4
PRODUCT LIFE:
5.5
DISPOSAL:
eliminate the possibility of inadvertent reuse.
6.0 MAINTENANCE, SERVICING, AND STORAGE
6.1
CLEANING:
•
drain out. Clean labels as required.
•
prevent the lifeline from fully retracting back into the housing causing a potential free fall hazard.
IMPORTANT:
with water and a mild soap solution. Inspect the SRL per Table 1 before returning to service.
6.2
SERVICE:
6.3
STORAGE/TRANSPORT:
7.0 SPECIFICATIONS
7.1
PERFORMANCE:
7.2
DIMENSIONS:
Connectors.
7.3
LABELING:
7.4
MATERIALS:
"Section 5.5 - Disposal"
If the lifeline contacts acids or other caustic chemicals, remove the SRL from service and wash
"Inspection & Maintenance Log"
"Section 5.5 - Disposal"
"Section 2.0 - Limitations & Requirements" for performance
isafe.capitalsafety.com. Follow the
Section 2.5 - Inspection