Autonics BF4R 매뉴얼 - 페이지 4

{카테고리_이름} Autonics BF4R에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Autonics BF4R 8 페이지. Button adjustment fiber optic amplifiers
Autonics BF4R에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지), 매뉴얼 (11 페이지), 매뉴얼 (7 페이지), 제품 설명서 (5 페이지)

페이지 인쇄

1. Sensitivity Adjustment

BF4 Series

Installations

Mounting amplifier unit

Hook the front part of the amplifier on DIN rail. Press the

rear part of the amplifier on DIN rail.

Push the back of amplifier toward ① and lift the hole for

fiber toward ② up then simply take it out without tools.

Installation of fiber optic cable

Lift up the protective cover to the ① direction to release

the lock setting.

Insert the cable to the ② direction and adhere between

the cable and the inside of the amplifier unit.

(insert depth: approx. 10mm)

Place up the lock lever to ③ direction to lock the lock

setting and close the protective cover.

Connection of fiber optic cable & amplifier

● In case of using L bracket

Fixing nut

Unit Description

● Standard type (BF4R/BF4RP/BF4G/BF4GP)

External input sensitivity setting type (BF4 -R)

1. Control output indicator (red): Turns ON or OFF by control output status.

2. Stability indicator (green): Turns ON at stable light ON/OFF level.

3. Mode setting switch - SET: Set the switch to [SET] to use set the function.

4. Timer setting switch (standard type, external input sensitivity setting type)

- NON: Set the switch to [NON] not to use timer function.

- OFD: Set the switch to [OFD] to use OFF Delay timer function.

External synchronization setting switch (external synchronization input type)

- GATE: Set the switch to [GATE] to use external synchronization as gate synchronization.

- TRIG: Set the switch to [TRIG] to use external synchronization as trigger synchronization.

5. Sensitivity setting button: Used for sensitivity setting

6. Lock lever: Used for connecting fiber optic cable.

B-36

L bracket

- LOCK: Set the switch to [LOCK] not to set the function.

[Mounting]

②

● In case of using screw

※ Notice: If setting bolt is tightened with over

specified tightening torque, hood of

fiber optic cable may be damaged.

● External synchronization input type (BF4 -E)

[Removing]

①

②

①

③

Tightening torque:

Max. 0.198N . m