ADENDORFF MCJ1000 조립 및 작동 매뉴얼 - 페이지 10
{카테고리_이름} ADENDORFF MCJ1000에 대한 조립 및 작동 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADENDORFF MCJ1000 13 페이지. Wood lathe 14 x 40 inch
페이지 인쇄Upper Belt Pulley (5)
Driving Belt (12)
Protecting Cover (11)
5.
Adjust the Driving Belt (12) to the proper steps on the lower Belt Pulley (13) and the
upper Belt Pulley (5) to obtain the desired speed. Make sure Driving Belt is not
crossed into the adjacent steps. The Driving Belt should be placed on the same step
on each Belt Pulley.
Upper Belt Pulley (5)
Lower Belt Pulley (13)
6.
Lower the Belt Pulley (13) until there is a light tension on the Driving Belt (12). Tighten
the Motor Screw (14).
7.
Close the Protecting Cover (11) and insert and tighten the Screws (3).
Make sure the Driving Belt is neither too loose nor too tight.
Power Switch (30)
Motor Screw (14)
Lower Belt Pulley (13)