AGRITAL ISEKI TXG Series 설치 매뉴얼 및 부품 목록 - 페이지 9

{카테고리_이름} AGRITAL ISEKI TXG Series에 대한 설치 매뉴얼 및 부품 목록을 온라인으로 검색하거나 PDF를 다운로드하세요. AGRITAL ISEKI TXG Series 18 페이지.

Mount license plate on the rear bulkhead. Drilling (diameter 9cm) the rear bulkhead and the

license plate itself.

Screw the plate to the bulkhead door by inserting plastic spacer provided (used by thickness).

Reconnect the wires of the light plate holder.

Mount rear lights (removed earlier) to brackets welded to the cab, using screws M5x16 and then

reconnect the wires.

Mount the headlights in the same manner and using the extension (n. 2) provided for the

connection.

Assemble the closure of the fender right and left using the self-tapping screws for fixing to the side

of the cabin, the seal mounted previously on the closure, must remain towards the fender and if

necessary seal with the silicone between the side of the cabin and the closure.