Agriweld TRANSPORT BOX 매뉴얼 - 페이지 5
{카테고리_이름} Agriweld TRANSPORT BOX에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Agriweld TRANSPORT BOX 19 페이지. For john deere 8rx tombstone
페이지 인쇄Before operational use, it is important to inspect the tractor and attachment with the recommended
pre-use checks to prevent damage or danger.
•
Check that the tractor is in full working order.
•
Check all mounting/securing pins are present and do not appear to be worn or missing.
Replace as required.
•
Check any lights on the attachment are in full working order.
•
Physically check all nuts and bolts or other fixings are present and tight. Do not use if any are
missing or broken.
•
Visually check welds for cracks - this can compromise the strength and operational use of
the product and may pose a health and safety risk.
•
If relevant, check round all hydraulic hose and connections for leaks and damaged hydraulic
pipe. Replace as required. Do not attempt to repair hydraulic hose.
•
Check for any potential damage to the serial plate as this helps to identify the product, its
origin of manufacture and will be required to order spare parts if needed.
•
Check all ancillary parts are present, in good condition and that none are defective or
missing.
•
When products are to be stored away when not in use, correct storage methods are
important in protecting the paintwork. The product should be cleaned down thoroughly and
stored inside where possible, always detach any other attachments from the Agriweld
product when you have finished using them.
•
Always store your product in an area free from obstruction so not to cause hazard to others
or damage to it.
•
Always follow and record a regular greasing /lubrication routine. Essential greasing points
are marked and easy to see on the product.
PRE-USE CHECKS & STORAGE
5