activTek INDUCT 10000 매뉴얼 - 페이지 9
{카테고리_이름} activTek INDUCT 10000에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. activTek INDUCT 10000 16 페이지. Electronic air purification system
activTek INDUCT 10000에 대해서도 마찬가지입니다: 매뉴얼 (16 페이지)
페이지 인쇄INSTALLING THE UNIT
1.
Find the optimal position downstream from the air handler. Ensure location in duct has enough
room for the mounting plate. It is recommended for maximum effectiveness that the unit be
placed as close to the air handler as possible.
NOTE:
The illustrations are shown installing an activTek INDUCT 10000. The procedures shown
in this manual apply to both units, unless otherwise indicated.
2.
Using the appropriate template
included, mark location for
installation.
3.
Using a 4" (4 inch) hole saw, cut
opening(s) into duct work.
4.
Place the mounting plate squarely into
place and fasten to duct work with sheet
metal screws.
5.
Move ballast assembly to
location and secure to
duct work with the four (4)
thumb screws provided.
6.
Unit may be taped with
aluminum HVAC tape to provide
complete seal.
Cut the second hole for
activTek INDUCT 10000 only.
9