iHealth PT3SBT 사용자 설명서 - 페이지 8

{카테고리_이름} iHealth PT3SBT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. iHealth PT3SBT 18 페이지. Wireless no-touch forehead thermometer

ASTM laboratory accuracy requirements in the display range of 37 to 39°C (98

to 102°F) for IR thermometers is ± 0.2 °C ( ± 0.4°F), whereas for

mercury-in-glass and electronic thermometers, the requirement per ASTM

Standards E667-86 and E1112-86 is ±0.1 °C (±0.2°F).

Expected use and scope of applications

This product mainly uses infrared sensors to measure the temperature of the

human forehead and transmit the temperature to a smart device with Bluetooth.

It can be used for babies, children, and adults. Infants and children cannot

operate the thermometer; it is recommended that adults take the

measurement.

Reminder: Temperature readings may differ according to skin tone and

measurement distance.

It is not recommended for people whose measuring part has local lesions,

such as inflammation, trauma, postoperative, etc.

The patient is an intended operator. The patient can measure, transmit data

and change battery.

(1) Installing the product

Insert two batteries into the battery compartment on the back of the device.

The product will initiate a self-check and then enter the standby mode (if the

device indicates low battery power, then replace the batteries to ensure ample

power supply).

(2) Measurement process

① Aim the thermometer probe at the center of the forehead and keep the

probe 1.18 in (3cm) away from the forehead (the optimal distance is about

the width of an adult's index finger). Do not touch the forehead with the

probe. The infrared thermometer measurement window should be held

perpendicular to the forehead and the subject should remain steady.