HighPoint SSD7540 설치 매뉴얼 - 페이지 11

{카테고리_이름} HighPoint SSD7540에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint SSD7540 14 페이지. Using nvme raid aics with the dell precision 3930 rack workstation
HighPoint SSD7540에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (9 페이지), 설치 매뉴얼 (15 페이지), 설치 매뉴얼 (13 페이지), 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (16 페이지), 빠른 설치 매뉴얼 (11 페이지), 설치 매뉴얼 (19 페이지), 빠른 설치 매뉴얼 (6 페이지), 매뉴얼 사용 (19 페이지)

SSD7540 Linux CentOS8.2 Installation Guide

j. Follow the prompts to complete the driver installation.

k. After the installation is complete, you can perform a system update operation.

3 Monitoring the Driver

Once the driver is running, you can monitor it through the Linux proc file system support.

There is a special file under /proc/scsi/hptnvme /. Through this file you can view driver

status and send control commands to the driver.

Note

The file name is the SCSI host number allocated by OS. If you have no other SCSI cards

installed, it will be 0. In the following sections, we will use x to represent this number.

Using the following command to show driver status:

# cat /proc/scsi/hptnvme/x

This command will show the driver version number, physical device list and logical device

list.

HighPoint RAID Management Software is used to configure and keep track of your hard

disks and RAID arrays attached to SSD7540 controller.

Please refer to HighPoint RAID Management Software documents for more information.

Error1： If you fail to install the driver or restart the system after installing the driver, the

driver cannot be used. Please follow the steps below.

a. After entering the system, use the command to uninstall the original driver:

# hptuninhptnvme

b. Connect to the network and install the following package files:

# yum install elfutils-libelf-devel

- 9 -