HighPoint SSD7540L 빠른 설치 매뉴얼 - 페이지 8

{카테고리_이름} HighPoint SSD7540L에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint SSD7540L 10 페이지.

Step 10. On the rear of the SSD7540L, refasten the 6 screws that were

removed in step 1.

Note:

Make sure the heatsink/fan panel is properly aligned with

the controller board (PCB), and that it makes full contact with the

thermal pads before refastening it to the NVMe HBA. If the

heatsink is improperly installed, it will be unable to sufficiently

cool the NVMe SSD's and controller componentry, which may

result in damage to the SSD's or controller hardware,

performance loss, unstable I/O, and the loss of data.

Step 11. Power up the SSD external power supply

Note:

If the external power supply is not powered on, the SSDs

may drop offline or remain undetected, which could lead to data

loss.