AFL FlexTester 3 빠른 참조 매뉴얼 - 페이지 12
{카테고리_이름} AFL FlexTester 3에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AFL FlexTester 3 18 페이지.
페이지 인쇄OTDR Mode: Information Page Features
The information page displays how the test was created.
• Use
keys to highlight the desired setup parameter.
• Use
keys to change the highlighted setup parameter (except [Event Thresholds...] parameter). You may
change these parameters to correct locations in the Event Table after the test is complete.
• When done, press [Recalc Events] to recalculate the Event Table.
key to display submenu A .
• Press
• Use
keys to highlight the desired
parameter.
• Use
keys to change the highlighted
parameter.
• When done, press [Recalc Events] to recalculate
the Event Table.
These fields show the current setup conditions.
For multiple-wavelength tests, press to toggle
the wavelength and display setup conditions for
that wavelength.
Event thresholds can be adjusted and
macrobend detection enabled or disabled before
recalculating events.
12
A