Galvin Specialised Ezy-Drink CP-BS Lead Safe 설치 매뉴얼 - 페이지 3
{카테고리_이름} Galvin Specialised Ezy-Drink CP-BS Lead Safe에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Galvin Specialised Ezy-Drink CP-BS Lead Safe 5 페이지. Hob mounted bottle filler tap with reduced flange
페이지 인쇄Version 1, 1 May 2020, Page 3 of 5
3. Secure bottle filler and connect water
Fit cup washer and nut.
Tighten assembly ensuring it cannot be
turned once installed.
Connect water inlet. Thread tape/sealant
should be used. Ensure the thread tape
doesn't obscure the inlet opening.
5. Fit & position spout
Position the spout in the desired position
ensuring the position hole lines up with the
grub screw as shown.
Ensure supplied O-Ring is fitted to the filler
inlet.
Insert the filler assembly into the outlet.
Note: We recommend a small amount of an
approved silicone grease is used on the o-ring
before assembly to ensure ease of fitment.
Water Inlet
4. Remove spout
Remove spout from assembly as shown.
The spout can be rotated to 4 different positions
to suit installation.
6. Secure spout
Once positioned and the alignment is correct
(see above), tighten the grub screw to secure
the outlet.
th
Version 1,30
April 2020, Page 3 of 5
Align