Dynojet Power Commander III USB EX 설치 지침 - 페이지 2
{카테고리_이름} Dynojet Power Commander III USB EX에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynojet Power Commander III USB EX 3 페이지. 2000-2001 honda
Dynojet Power Commander III USB EX에 대해서도 마찬가지입니다: 설치 지침 (3 페이지), 설치 지침 (4 페이지), 설치 지침 (3 페이지), 설치 지침 (3 페이지)
remove these bolts
stock harness
i224-411EX
PCIII USB EX
harness
The ignition must be turned OFF before
installation.
1
Remove the left hand fairing and inner fairing.
2
Remove the bolts securing the coolant reserve
bottle to the engine as shown in Figure A.
Allow the bottle to hang out of the way
temporarily.
3
Disconnect the stock wiring harness from the
throttle body harness as shown in Figure B.
These connectors are brown in color and are
located under the throttle bodies.
4
Temporarily lay the PCIII USB EX next to the
gauge panel and route the PCIII USB EX
harness along the stock wiring harness to the
throttle body connection as shown in Figure C.
2006-2007 Kawasaki ZX14 - PCIII USB EX - 2