MAINLINE ML510 설치 매뉴얼 - 페이지 3

{카테고리_이름} MAINLINE ML510에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. MAINLINE ML510 3 페이지. Undercounter lavatories

INSTALL THE LAVATORY (cont.)



Install the drain to the lavatory according to the drain

manufacturer's instruction.

NOTE:

Do not use adhesive or adhesive sealants.



Apply a continuous bead of quality sealant to the top

surface of the lavatory rim where it will contract the

countertop.

IMPORTANT

Caution: Risk of product damage.



Position the lavatory squarely under the cutout before tightening the clamps. Draw the lavatory rim up against the countertop until

it is snug. Do not overtighten.



Immediately wipe away any excess sealant and fill any voids as needed.



Allow the sealant to set for 30 minutes before proceeding.



Connect and tighten the trap to the drain, and complete the water supply connections to the faucet according to the instructions

packed with the faucet.



Run water into the lavatory and check for leaks.



Clean up with a non-abrasive cleaner.

THANK YOU FOR CHOOSING MAINLINE

If you encounter any installation or performance problems, please don't hesitate to contact

IMPORTANT

Caution: Risk of personal injury or product

damage.

cause injury if handled carelessly. Get help lifting the

lavatory.



For marble countertops, install the lavatory to the countertop with

the clamps and screws. For other countertop materials, refer to the

countertop manufacturer's instructions for recommendation fasteners.

Overtightening the nuts may cause irreparable damage to the lavatory.

Page 3

Handle with care. Product can break, chip or